Fujitsu C141-E090-02EN manual 092

(3)Special jumper settings

(a)2.1 GB clip (Limit capacity to 2.1 GB)

If the drive cannot be recognized by system with legacy BIOS’s which do not allow single volume sizes greater than approximately 2.1 GB, the following jumper settings should be applied.

2 4 6 8 2 4 6 8 2 4 6 8

1	3	5	7	9	1	3	5	7	9	1		3	5	7	9
Master Device					Slave Device						Cable Select
Model					No. of cylinders				No. of heads			No. of sectors
MPE3102AH					4,092				16					63
MPE3136AH					4,092				16					63
MPE3204AH					4,092				16					63
MPE3273AH					4,092				16					63

(b)Slave present

If the slave device does not use the Device Active/Slave Present (DASP–) signal to indicate its presence, the device is configured as a Master with slave present when the following jumper settings is applied.

2 4 6 8

1 3 5 7 9

Slave present

C141-E090-01EN 3 - 15