Fujitsu C141-E090-02EN manual Information to be read by Identify Device command 1

Table 5.5 Information to be read by IDENTIFY DEVICE command (1 of 4)

Word	Value	Description
0	X‘045A’	General Configuration *1
1	*2	Number of cylinders
2	X‘0000’	Reserved
3	*3	Number of Heads
4	X‘0000’	Retired
5	X‘0000’	Retired
6	X‘003F’	Number of sectors per track
7-9	X‘000000000000’	Retired
10-19	–	Serial number (ASCII code) *4
20	X‘0000’	Retired
21	X‘1000’	Buffer size in 512 byte increments
22	X‘0004’	Number of ECC bytes transferred at READ LONG or WRITE LONG command
23-26	–	Firmware revision (ASCII code) *5
27-46	–	Model number (ASCII code) *6
47	X‘8010’	Maximum number of sectors per interrupt on READ/WRITE MULTIPLE command
48	X‘0000’	Reserved
49	X‘0B00’	Capabilities *7
50	X‘0000’	Reserved
51	X‘0200’	PIO data transfer mode *8
52	X‘0000’	Retired
53	X‘0007’	Enable/disable setting of words 54-58, 64-70 and 88 *9
54	(Variable)	umber of current Cylinders
55	(Variable)	Number of current Head
56	(Variable)	Number of current sectors per track
57-58	(Variable)	Total number of current sectors
59	*10	Transfer sector count currently set by READ/WRITE MULTIPLE command
60-61	*11	Total number of user addressable sectors (LBA mode only)
62	X‘0000’	Retired
63	X‘xx07’	Multiword DMA transfer mode *12
64	X‘0003’	Advance PIO transfer mode support status *13
65	X‘0078’	Minimum multiword DMA transfer cycle time per word : 120 [ns]
66	X‘0078’	Manufacturer's recommended DMA transfer cycle time : 120 [ns]
67	X‘0078’	Minimum PIO transfer cycle time without flow control : 120 [ns]
68	X‘0078’	Minimum PIO transfer cycle time with IORDY flow control : 120 [ns]
69-79	X‘00’	Reserved
80	X‘001E’	Major version number *14
81	X‘0000’	Minor version number (not reported)
82	X‘346B’	Support of command sets *15
83	X‘4008’	Support of command sets *16
84	X‘4000’	Support of command set/feature extension (fixed)
85	X‘00xx’	Enable/disable Command set/feature enabled. *17
86	X‘000x’	Enable/disable Command set/feature enabled. *18
87	X‘4000’	Default of command set/feature (fixed)
88	X‘xx1F’	Ultra DMA modes *19
89	X‘00xx’	Time required for security erase unit completion *20
90	X‘0000’	Time required for Enhanced security erase completion
91	X‘00xx’	Current advanced power management value
92	X‘0000’	Reserved
93	X‘x000’	CBLID detection results *21
94-127	X‘00’	Reserved
128	X‘xx’	Security Status
129-255	X‘00’	Reserved

5 - 30 C141-E090-01EN