TABLES
|
| page | |
1.1 | Specifications | 1 | - 4 |
1.2 | Model names and product numbers | 1 | - 5 |
1.3 | Current and power dissipation | 1 | - 6 |
1.4 | Environmental specifications | 1 | - 8 |
1.5 | Acoustic noise specification | 1 | - 8 |
1.6 | Shock and vibration specification | 1 | - 9 |
3.1 | Surface temperature measurement points and standard values | 3 | - 5 |
3.2 | Cable connector specifications | 3 | - 8 |
4.1 | 4 | - 9 | |
4.2 | Write clock frequency and transfer rate of each zone | 4 | - 12 |
5.1 | Interface signals | 5 | - 2 |
5.2 | Signal assignment on the interface connector | 5 | - 3 |
5.3 | I/O registers | 5 | - 7 |
5.4 | Command code and parameters | 5 | - 14 |
5.5 | Information to be read by IDENTIFY DEVICE command | 5 | - 30 |
5.6 | Features register values and settable modes | 5 | - 35 |
5.7 | Diagnostic code | 5 | - 39 |
5.8 | Features Register values (subcommands) and functions | 5 | - 49 |
5.9 | Format of device attribute value data | 5 | - 51 |
5.10 | Format of insurance failure threshold value data | 5 | - 52 |
5.11 | Contents of security password | 5 | - 56 |
5.12 | Contents of SECURITY SET PASSWORD data | 5 | - 61 |
5.13Relationship between combination of Identifier and Security level,
| and operation of the lock function | 5 | - 61 |
5.14 | Command code and parameters | 5 | - 66 |
5.15 | Recommended series termination for Ultra DMA | 5 | - 84 |
5.16 | Ultra DMA data burst timing requirements | 5 | - 88 |
6.1 | Default parameters | 6 | - 6 |
xiii |
