Fujitsu C141-E090-02EN instruction

Table 5.5 Information to be read by IDENTIFY DEVICE command (2 of 4)

*1 Word 0: General configuration
	Bit 15: 0 = ATA device				0
	Bit 14-8: Vendor specific
	Bit 7: 1 = Removable media device				0
	Bit 6:	1 = not removable controller and/or device			1
	Bit 5-1: Vendor specific
	Bit 0: Reserved				0
2 Number of Cylinders, 3 Number of Heads,
*11 Total number of user addressable sectors (LBA mode only.)

		MPE3102AH	MPE3136AH	MPE3204AH	MPE3273AH
	*2		X‘3FFF’
	*3		X‘0010’
	*11	X‘01315326’	X‘01971988’	X‘0262A64C’	X‘032E3310’

*4 Word 10-19: Serial number; ASCII code (20 characters, right-justified)

*5 Word 23-26: Firmware revision; ASCII code (8 characters, Left-justified)

*6 Word 27-46: Model number;

ASCII code (40 characters, Left-justified), remainder filled with blank code (X'20') One of the following model numbers;

MPE3102AH, MPE3136AH, MPE3204AH, MPE3273AH

*7 Word 49:	Capabilities
Bit 15-14:	Reserved
Bit 13:	Standby timer value 0 = Standby timer values shall be managed by the device
Bit 12:	Reserved
Bit 11:	IORDY support	1=Supported
Bit 10:	IORDY inhibition	0=Disable inhibition
Bit 9:	LBA support	1=Supported
Bit 8:	DMA support	1=Supported
Bit 7-0:	Vendor specific

*8 Word 51: PIO data transfer mode

Bit 15-8: PIO data transfer mode X'02'=PIO mode 2

Bit 7-0: Vendor specific

*9 Word 53: Enable/disable setting of word 54-58 ,64-70 and 88

Bit 15-3:	Reserved
Bit 2:	Enable/disable setting of word 88		1=Enable
Bit 1:	Enable/disable setting of word 64-70		1=Enable
Bit 0:	Enable/disable setting of word 54-58		1=Enable
*10 Word 59: Transfer sector count currently set by READ/WRITE MULTIPLE command
Bit 15-9: Reserved
Bit 8:	Multiple sector transfer	1=Enable
Bit 7-0: Transfer sector count		currently set	by READ/WRITE MULTIPLE without interrupt
	supports 2, 4, 8 and 16 sectors.

5 - 31