Basic operation
| •Even in an adjusted angle position, touching the |
| touch | ||
| DVD/CD EJECT | ||||
| switch or the |
| will open the display. When the display | ||
ATTENTION | Memory Stick | ||||
| closes, it will return to the adjusted angle position. | ||||
| •If the display is in an adjusted angle position when the vehicle ignition is | ||||
| turned off, the display will automatically return to the original position (0°). | ||||
| If the ignition switch is then turned to ACC or ON, the display will return to | ||||
| the adjusted angle position. | ||||
|
|
|
|
|
|
|
|
|
|
|
|
| •Be careful not to pinch your hands or other objects when adjusting the | ||||
Caution | angle of the display. This could cause an injury or damage to the display. | ||||
•Observe the following cautions when adjusting the angle of the display. <Automatic transmission vehicle>
When setting the tilt position, choose an angle that does not interfere with operation of the shift lever in the "P", "R" or "N" lever positions. (If there is interference with the shift lever in operating positions, do not set a tilt position.)
<Manual transmission vehicle>
When setting the tilt position, choose an angle that does not interfere with operation of the shift lever in the 1, 3, 5 or "R" lever positions. (If there is interference, do not set a tilt position.)
27