Basic operation

Setting guide tones

You can turn guide tones on and off.

At the time of purchase, the unit is set so that a beep sounds as a guide tone when an operation is carried out.

1

2

Press the [FUNC] panel button.

The mode will change to function mode.

If you press the [FUNC] button once more, function mode will be exited.

Touch the Guide Tone touch switch.

The guide tones are turned on and off each time the Guide Tone touch switch is touched.

When the guide tones are turned off, the touch switch display color changes to the selected color.

Setting the reverse linking function for the back-eye camera

Back-eye cameras other than ECLIPSE products are connected to the CAPTURE IN terminal, the camera images from the rear of the vehicle can be automatically displayed on the unit's monitor screen when the vehicle's transmission is placed into reverse. This function for displaying images in this way can be turned on and off.

1

2

Press the [FUNC] panel button.

The mode will change to function mode.

If you press the [FUNC] button once more, function mode will be exited.

Touch the Reverse touch switch.

The reverse linking function is turned on and off each time the Reverse touch switch is touched.

When the reverse linking function is turned on, the touch switch display color changes to the selected color.

67