Basic operation

[SOUND]

Button

Setting the subwoofer

This function switches the phase (the output timing) and adjusts the output when a subwoofer is connected.

1 Press the [SOUND] panel button.

Switches to Sound Adjustment Screen Page 1.

Switching phase with (phase control)

Some sounds output from the subwoofer are in the same frequency range as the sounds from the front/rear speakers, and depending on the conditions inside the vehicle, these sounds can cancel each other out. The subwoofer uses phase switching to guard against this phenomenon.

To match the conditions in the vehicle, this function can be set to either "Normal" (subwoofer output timing is the same as the front/rear speakers) or "Reverse" (subwoofer output timing is offset from the front/rear speakers).

1Touch the PH touch switch.

Each time the PH touch switch is pressed the phase will switch between Normal/Reverse. The color of the button will change when Reverse is selected.

36