How to operate the tuner

How to operate the tuner

The unit has four built-in radio bands: AM1, AM2, FM1 and FM2. You can preset up to six channels for each band.

[SOURCE]

Button

[TUNE TRACK]Button

Preset Switch

Listening to the tuner

1

2

Press the [SOURCE] panel button.

The display will change to the audio source menu screen.

Touch the AM or FM touch switch to select the band.

To change to AM1, AM2, FM1 or FM2, change back to the audio source ATTENTION menu screen and touch AM or FM again.

Selecting a broadcast stationManual selection

1Turn the [TUNE TRACK] panel button briefly (less than 1 second).

The frequency changes by a single step each time the button is turned.

(1 step is 9 kHz (for AM) and 0.05 MHz (for FM).) Turn right: The frequency becomes higher. Turn left: The frequency becomes lower.

68