Fujitsu fi-5000N 5000N-fithe Installing, fi-5000NOperator’s Guide, 3.2 Installing the fi-5000N

3.2 Installing the fi-5000N

3. Connect the USB cable to the USB connector.

ATTENTION	Be sure to use the USB cable provided with the scanner. Correct operation
	with commercially available cables is not guaranteed.

4. Connect the other end of the USB interface cable to the scanner.

ATTENTION	The message "Scanner is disconnected" is displayed on the Message Dis-
	play of fi-5000N if the scanner is not connected properly, or if the power of
	the scanner is turned off. Check the connection of the scanner when it hap-
	pens. Refer to the scanner product manual for details on turning on the
	power of the scanner.

3

5000N-fi the Installing

fi-5000N Operator’s Guide 13