5.6 Managing Scanner Information
About Offset and Scale AdjustmentIf you click the [Offset] button, the following window appears.
You can change the offset amount of the start position, and the magnification of the
[Offset Setting]
Fine adjustments can be done if the document position is different from the actual scanning position.
Generally, there is no need to adjust the setting as it is adjusted to an optimum value at the factory. *The setting range differs depending on the scanner.
When using the flatbed, you can specify the following modes to delete shadows on top edge and left edge of the paper.
•"Enable eliminating a dark area on the top of the image" mode
•"Enable eliminating a dark area on the left side of the image" mode *These modes may not appear depending on the scanner.
[Vertical Magnification Adjustment]
You can change the magnification correction value for
In case of ADF, the magnification value for feeding direction can be adjusted based on factory adjustments.
In case of flatbed, the magnification value for the scanning head movement direction can be adjusted based on factory adjustments.
(This function is used when the aspect ratio of the generated image looks different from the scanned document.)
*The adjustable range differs depending on the scanner.
5
Software
| 63 | |
|