3.5 Automatic Turning Backlight Off Settings
You can configure the Message Display’s backlight to be turned off automatically if no operation is performed for 5 minutes. (The default setting is "Auto off".)
1.Open the
The following settings screen appears.
Setup
Register Finger
Change PIN Code
Show Network Config
2. With the [L] key, select "Administrator Setup", and press the [ENT] key.
The screen to enter the Administrator's PIN (personal iden- |
|
tification number) appears. | PIN:_ |
| Cancel:[ESC] |
3. Enter the Administrator PIN (the default setting is "5000"), and press the [ENT] key.
The following screen appears.
Administrator Setup
Configure Network
Pull Mode Authentic
Auto Logout Time
4. With the [L] key, select "Auto Backlight Off", and press the [ENT] key.
The following screen appears.
Turn backlight automatically off?
Auto off Always on
5.To turn the backlight off automatically after a certain period of time, select "Auto off", to leave the backlight’s power always on, select "Always on" and then press the [ENT] key.
The following screen appears.
Auto backlight off setting changed
With this, the backlight setting is done.
3
| 19 | |
|