6.2 User Authentication by Fingerprint

To change from the logout status to the status when the scanner can start scanning (login), fingerprint authentication must be done. (Also, PIN authentication is equipped as an alternative to an injured users or users with difficulties in fingerprint authentication.)

1.When "Place your finger on the sensor" is displayed on the fi-5000N Message Display (this indicates the "Logout" status), place on the fingerprint sensor the fin- ger that has been registered.

Place your finger

on the sensor

HINT

When you learn to place the finger correctly, you can remove the Finger Guide. For the removal, refer to "APPENDIX Using User Authentication by Fingerprint."

When the finger placed on the fingerprint sensor is

 

detected, the following message appears and the fingerprint

 

capturing begins.

Capturing

 

fingerprint...

2.If the capturing of your fingerprint is successfully done, a buzzer sounds and at the same time the following screen appears. Remove your finger from the fingerprint sen- sor.

3. Next, the identification of your fingerprint begins.

If the identification of your finger is successfully done, a buzzer sounds and at the same time the following login screen appears.

Load the document on to ADF and press [Scan] or [Send to] button on the scanner.

Identifying...

Remove your finger from the sensor

(user's name)

Load the documents

onto scanner & press

[Scan]/[Send to]

74