Manuals / Brands / Computer Equipment / Scanner / Fujitsu / Computer Equipment / Scanner

Fujitsu FI-6000NS Chapter 3 Setting up for Network Use, 3.1 Logging in, 3.2Changing the Administrator Password

1 35

Download 35 pages, 1.32 Mb

Chapter 3 Setting up for Network Use

3.1 Logging in

To set up the network connection, you must login as the administrator. The user name and initial password for the administrator are as follows:

•User Name: admin

•Password: password

1.Press the startup button.

Startup button

⇒After system startup, the "Login" screen appears..

3. Enter the password.

Password is case sensitive.

Enter "password" here.

4.Press the [Login] button.

⇒If the administrator name and password are valid, the "System Settings" screen appears.

3.2Changing the Administrator Password

The administrator password can be changed.

1.Select the [System Settings] tab on the top menu.

2.Press the [Down] button on the left side menu.

⇒Scroll the left side menu down until the [Admin Password] tab appears.

3.Select the [Admin Password] tab on the left side menu.

ATTENTION

HINT

After turning the power off, wait for at least ten seconds before turning the power back on again.

If touch panel responses seem out of alignment with the positions of objects on the LCD screen, calibrate the screen.

For details, refer to "Appendix A Calibrating the Touch Panel" (page 13).

2. Enter the user name.

User name is case sensitive. Enter "admin" here.

⇒The "Admin Password" screen appears.

4.Enter the "Current Password", "New Password", and "Confirm New Password".

Passwords must be between 7 and 127 characters long.

Alphanumeric characters (case sensitive) and symbols may be entered.

5.Press the [OK] button.

⇒The new admin password is set.

Network Scanner fi-6000NS Getting Started		5
Network Scanner fi-6000NS Getting Started		5

Contents

Page Page Chapter Chapter 2 Setting up the Scanner Chapter 3 Setting up for Network Use Downloading the Manual Appendix A Calibrating the Touch Panel Appendix B Scanner Care Appendix C Replacing Consumable Parts Appendix D Network Connection Troubleshooting Copyright Page Page WinDump3.9.5 Introduction Use in High-safetyApplications About the Use of Mercury LCD Peculiarities Replacing Batteries Trademarks Manufacturer Symbols Used in This Manual About Maintenance Warning Indications Used in This Manual Warning Label ■Safety Precautions Do not damage the AC cable Use only specified AC cables and connector cables Do not touch the AC cable with wet hands Wipe any dust from the power plug Do not install the scanner on unstable surfaces Do not block the ventilation ports Do not place heavy objects or climb on top of the scanner Firmly insert the power plug Avoid any contact when scanner is in use Page Chapter 1 Scanner Features 1.1 Scanner Features 1.2 From Arrival through Operation 1.3 Checking the Contents of the Scanner Package 1.4Names and Functions of Parts Chapter 2 Setting up the Scanner 2.1 Space Requirements 2.2 Installing the Scanner 2.3 Connecting the Cables Chapter 3 Setting up for Network Use 3.1 Logging in 3.2Changing the Administrator Password 3.3 Setting the Scanner Name 3.4 Setting the Region/Timezone 3.5 Setting the IP Address/DHCP 3.6 Setting the DNS Server 3.7 Setting the WINS Server 3.8Checking the Network Connection 3.9 Restarting the System Chapter 4 Downloading the Manual Chapter 5 Performing a Scan Test ■If Scanning Completes Successfully ■If Scanning does not Complete Successfully Appendix A Calibrating the Touch Panel Appendix B Scanner Care Appendix C Replacing Consumable Parts Appendix D Network Connection Troubleshooting Appendix D ■Checking Basic Network Operation with a Ping Test ■Failure to Connect to a Remote Computer using its IP Address ■Failure to Connect to a Remote Computer using its Server Name ■Failure to Connect to the Scanner using a Web Browser ■Problems when Connecting to the Scanner using a Web Browser Appendix E Troubleshooting Network Scanner fi-6000NS Getting Started