Manuals / Brands / Computer Equipment / Scanner / Fujitsu / Computer Equipment / Scanner

Fujitsu FI-6000NS 3.3 Setting the Scanner Name, 3.4 Setting the Region/Timezone

1 35

Download 35 pages, 1.32 Mb

3.3 Setting the Scanner Name

A scanner name may be set to provide a network alias for the device.

Do not use a name that is already

ATTENTION	being used in the network.
	being used in the network.
	Name duplication will cause a network
	connection error.

HINT

If the scanner name is the same as one already in use, network communication problems will occur. In this case, try the following steps:

1.Disconnect the LAN cable and turn the scanner off.

2.Reboot the scanner with the LAN cable still disconnected, and enter a non- duplicate scanner name.

3.Reboot the scanner again.

4.Re-connect the LAN cable to the scanner.

1.Select the [System Settings] tab on the top menu.

2.Select the [Scanner Name] tab on the left side menu.

⇒The "Scanner Name" screen appears.

3.Enter a scanner name.

Scanner names may be up to 15 characters long. Use only alphanumeric characters (case sensitive) and hyphens.

Scanner names cannot consist of numbers only.

4.Press the [OK] button.

⇒The restart confirmation screen appears.

5.Press the [Later] button.

⇒The current scanner name, or changed scanner name after next restart, is displayed.

Restart may be performed after all necessary settings have been completed.

Continue with the Region/Timezone settings.

3.4 Setting the Region/Timezone

1.Select the [System Settings] tab on the top menu.

2.Select the [Region/Timezone] tab on the left side menu.

⇒The "Region/Timezone" screen appears.

3.Press the [List] button for the "Timezone" input field.

The default timezone is "(GMT+09:00) Osaka, Sapporo, Tokyo".

⇒A list of timezones appears.

4.Select a timezone.

6

Contents

Page Page Chapter Chapter 2 Setting up the Scanner Chapter 3 Setting up for Network Use Downloading the Manual Appendix A Calibrating the Touch Panel Appendix B Scanner Care Appendix C Replacing Consumable Parts Appendix D Network Connection Troubleshooting Copyright Page Page WinDump3.9.5 Introduction Use in High-safetyApplications About the Use of Mercury LCD Peculiarities Replacing Batteries Trademarks Manufacturer Symbols Used in This Manual About Maintenance Warning Indications Used in This Manual Warning Label ■Safety Precautions Do not damage the AC cable Use only specified AC cables and connector cables Do not touch the AC cable with wet hands Wipe any dust from the power plug Do not install the scanner on unstable surfaces Do not block the ventilation ports Do not place heavy objects or climb on top of the scanner Firmly insert the power plug Avoid any contact when scanner is in use Page Chapter 1 Scanner Features 1.1 Scanner Features 1.2 From Arrival through Operation 1.3 Checking the Contents of the Scanner Package 1.4Names and Functions of Parts Chapter 2 Setting up the Scanner 2.1 Space Requirements 2.2 Installing the Scanner 2.3 Connecting the Cables Chapter 3 Setting up for Network Use 3.1 Logging in 3.2Changing the Administrator Password 3.3 Setting the Scanner Name 3.4 Setting the Region/Timezone 3.5 Setting the IP Address/DHCP 3.6 Setting the DNS Server 3.7 Setting the WINS Server 3.8Checking the Network Connection 3.9 Restarting the System Chapter 4 Downloading the Manual Chapter 5 Performing a Scan Test ■If Scanning Completes Successfully ■If Scanning does not Complete Successfully Appendix A Calibrating the Touch Panel Appendix B Scanner Care Appendix C Replacing Consumable Parts Appendix D Network Connection Troubleshooting Appendix D ■Checking Basic Network Operation with a Ping Test ■Failure to Connect to a Remote Computer using its IP Address ■Failure to Connect to a Remote Computer using its Server Name ■Failure to Connect to the Scanner using a Web Browser ■Problems when Connecting to the Scanner using a Web Browser Appendix E Troubleshooting Network Scanner fi-6000NS Getting Started