Fujitsu M3000 - page 23

C120-E360-06EN 1-3

1.2 RCI Functions

• Facility control

Different kinds of facility control are available when the external power controller is

connected to the RCI. The external power controller can link with the customer's

existing facilities, power on each unit, recognize alarms of each unit, use the operator

call function through a contact interface, and perform other such operations. Use the

setrcic command at the setting of the facility control. For details on the facility

control, contact authorized service personnel.

• Power-on wait

The power-on wait function automatically powers on RCI I/O units before powering

on RCI hosts.

To use this function in a domain, execute the setpowerupdelay command in the

domain.

For details, see the XSCF Reference Manual.

• Asynchronous RCI monitoring

The following functions are available when the asynchronous RCI monitoring

function is enabled for a cluster:

zMutual monitoring for detection of abnormalities in RCI hosts (asynchronous

monitoring)

In addition to performing periodic monitoring by INTERCONNECT, this function

detects abnormalities such as the panic state in an RCI host.

zReliable stopping of an abnormal RCI host

This function stops, without fail, an abnormal RCI host without terminating a

hang-up, slowdown, or generated panic.

zSwitch control

This function controls line selector switching or other switching in the event that

an RCI host fails.

Contents

Main Page Page Page Page C120-E360-06EN Preface Audience Glossary Structure and Contents of this Manual Page SPARC Enterprise Mx000 Servers Documentation The manuals listed below are provided for reference. Page Page Abbreviated References to Other Documents Models The model names used in this manual are as follows. Text Conventions This manual uses the following fonts and symbols to express specific types of information. Prompt Notations Syntax of the Command-Line Interface (CLI) Command syntax Fujitsu Welcomes Your Comments Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i CHAPTER 2 Setup of the RCI for Operation . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 CHAPTER 3 Command Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Page Page Page Page CHAPTER 1 RCI Overview 1.1 RCI Features 1.2 RCI Functions Page 1.3 RCI Connection Scheme Page Page CHAPTER 2 Setup of the RCI for Operation 2.1 Overview of RCI Setup 2.2 RCI Setup for Initial Installation 2.2.1 RCI setup flow 2 2.2.2 Confirming RCI initialization 2.2.3 Connecting RCI cables 2.2.4 Making an RCI address setting 1 2.2.5 Making an RCI construction setting 1 2.3 RCI Setup for Addition of an RCI I/O Unit 2.3.1 RCI setup flow 2.3.2 Connecting an RCI cable 2.3.3 Making an RCI expansion setting 1 2.4 RCI Setup for Addition of an RCI Base Cabinet 2.4.1 RCI setup flow 2.4.2 Confirming RCI initialization 2 2.4.3 Connecting an RCI cable 2.4.4 Making an RCI address setting 1 2.4.5 Making an RCI expansion setting 1 2.5 RCI Setup for Replacement of an RCI I/O Unit 3 1 2 3 2.5.3 Replacing an RCI I/O Unit 2.5.4 Making an RCI replacement setting 1 2.6 RCI Setup for Replacement of an RCI Base Cabinet 2.6.1 RCI setup flow 2.6.2 Replacing an RCI host 2.6.3 Confirming RCI initialization Page 2.6.6 Making an RCI replacement setting 1 Page Page CHAPTER 3 Command Reference 3.1 setrci of an RCI I/O unit. OPERANDS The following operands are supported: EXTENDED DESCRIPTION zWhen "-c stat" is specified, the following states are displayed: zWhen the RCI state is Active, the following information is displayed after List: Page Page Page EXAMPLE 2: Makes the first RCI setting on the first host in an M8000/M9000 server. EXIT STATUS The following exit values are returned: 3.2 setrcic Page Page CHAPTER 4 Error Status 4.1 setrci error status 4.2 setrcic error status