Fujitsu M3000 - page 39

C120-E360-06EN 2-13

2.6 RCI Setup for Replacement of an RCI Base Cabinet

2Execute the setrci (8) command to initialize RCI settings.

2.6.4 Connecting an RCI cable

Connect the removed T-branch connector together with the RCI cable to the new RCI

host.

Note: Always do Confirming RCI initialization before reconnecting the RCI cable

to the RCI host.

2.6.5 Making an RCI address setting

Assign an RCI address to the new RCI host after replacement.

Make an RCI address setting on the new RCI host.

Specify the same RCI address as that assigned to the old RCI host.

• To specify an RCI address:

1Execute the setrci (8) command, and specify an RCI address.

Specify a decimal number for the fifth and sixth digits of the target RCI address.

A decimal number in a range of 1 to 32 can be used.

XSCF> setrci -c init

The command completed successfully.

<Example> Specifying the RCI address 000102ff for the XSCF

XSCF> setrci -c set <2>

The command completed successfully.

Contents

Main Page Page Page Page C120-E360-06EN Preface Audience Glossary Structure and Contents of this Manual Page SPARC Enterprise Mx000 Servers Documentation The manuals listed below are provided for reference. Page Page Abbreviated References to Other Documents Models The model names used in this manual are as follows. Text Conventions This manual uses the following fonts and symbols to express specific types of information. Prompt Notations Syntax of the Command-Line Interface (CLI) Command syntax Fujitsu Welcomes Your Comments Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i CHAPTER 2 Setup of the RCI for Operation . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 CHAPTER 3 Command Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Page Page Page Page CHAPTER 1 RCI Overview 1.1 RCI Features 1.2 RCI Functions Page 1.3 RCI Connection Scheme Page Page CHAPTER 2 Setup of the RCI for Operation 2.1 Overview of RCI Setup 2.2 RCI Setup for Initial Installation 2.2.1 RCI setup flow 2 2.2.2 Confirming RCI initialization 2.2.3 Connecting RCI cables 2.2.4 Making an RCI address setting 1 2.2.5 Making an RCI construction setting 1 2.3 RCI Setup for Addition of an RCI I/O Unit 2.3.1 RCI setup flow 2.3.2 Connecting an RCI cable 2.3.3 Making an RCI expansion setting 1 2.4 RCI Setup for Addition of an RCI Base Cabinet 2.4.1 RCI setup flow 2.4.2 Confirming RCI initialization 2 2.4.3 Connecting an RCI cable 2.4.4 Making an RCI address setting 1 2.4.5 Making an RCI expansion setting 1 2.5 RCI Setup for Replacement of an RCI I/O Unit 3 1 2 3 2.5.3 Replacing an RCI I/O Unit 2.5.4 Making an RCI replacement setting 1 2.6 RCI Setup for Replacement of an RCI Base Cabinet 2.6.1 RCI setup flow 2.6.2 Replacing an RCI host 2.6.3 Confirming RCI initialization Page 2.6.6 Making an RCI replacement setting 1 Page Page CHAPTER 3 Command Reference 3.1 setrci of an RCI I/O unit. OPERANDS The following operands are supported: EXTENDED DESCRIPTION zWhen "-c stat" is specified, the following states are displayed: zWhen the RCI state is Active, the following information is displayed after List: Page Page Page EXAMPLE 2: Makes the first RCI setting on the first host in an M8000/M9000 server. EXIT STATUS The following exit values are returned: 3.2 setrcic Page Page CHAPTER 4 Error Status 4.1 setrci error status 4.2 setrcic error status