Manuals / Brands / Computer Equipment / Server / Fujitsu / Computer Equipment / Server

Fujitsu M3000 CHAPTER 2 Setup of the RCI for Operation

1 56

Download 56 pages, 646.92 Kb

C120-E360-06EN 2-1

CHAPTER 2 Setup of the RCI for Operation

1

This chapter describes setup information for use of the RCI.

2.1 Overview of RCI Setup

The RCI can be set up as follows.

Note: RCI setup as explained in this chapter is carried out by authorized service

personnel.

zPrepare a serially-connected PC or a PC connected to the XSCF-LAN, specify its

IP address, establish a connection to the XSCF, and use the XSCF shell.

The RCI is configured in the following types of setup:

zRCI Setup for Initial Installation

zRCI Setup for Addition of an RCI I/O Unit

zRCI Setup for Addition of an RCI Base Cabinet

zRCI Setup for Replacement of an RCI I/O Unit

zRCI Setup for Replacement of an RCI Base Cabinet

Each setup for RCI configuration is explained in the following manner:

- Explanation -

1 The explanation of each RCI setup begins with a description of the overall setup

flow.

2 Setup procedures are then explained with setting examples.

• For detailed explanations and details on options of XSCF Shell commands, see the

man pages or, Chapter 3, "Command Reference."

• This section does not explain in detail the connection between the XSCF and a PC

or terminal and methods for logging in to the XSCF. For details, see the XSCF

User’s Guide.

Contents

Main Page Page Page Page C120-E360-06EN Preface Audience Glossary Structure and Contents of this Manual Page SPARC Enterprise Mx000 Servers Documentation The manuals listed below are provided for reference. Page Page Abbreviated References to Other Documents Models The model names used in this manual are as follows. Text Conventions This manual uses the following fonts and symbols to express specific types of information. Prompt Notations Syntax of the Command-Line Interface (CLI) Command syntax Fujitsu Welcomes Your Comments Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i CHAPTER 2 Setup of the RCI for Operation . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 CHAPTER 3 Command Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Page Page Page Page CHAPTER 1 RCI Overview 1.1 RCI Features 1.2 RCI Functions Page 1.3 RCI Connection Scheme Page Page CHAPTER 2 Setup of the RCI for Operation 2.1 Overview of RCI Setup 2.2 RCI Setup for Initial Installation 2.2.1 RCI setup flow 2 2.2.2 Confirming RCI initialization 2.2.3 Connecting RCI cables 2.2.4 Making an RCI address setting 1 2.2.5 Making an RCI construction setting 1 2.3 RCI Setup for Addition of an RCI I/O Unit 2.3.1 RCI setup flow 2.3.2 Connecting an RCI cable 2.3.3 Making an RCI expansion setting 1 2.4 RCI Setup for Addition of an RCI Base Cabinet 2.4.1 RCI setup flow 2.4.2 Confirming RCI initialization 2 2.4.3 Connecting an RCI cable 2.4.4 Making an RCI address setting 1 2.4.5 Making an RCI expansion setting 1 2.5 RCI Setup for Replacement of an RCI I/O Unit 3 1 2 3 2.5.3 Replacing an RCI I/O Unit 2.5.4 Making an RCI replacement setting 1 2.6 RCI Setup for Replacement of an RCI Base Cabinet 2.6.1 RCI setup flow 2.6.2 Replacing an RCI host 2.6.3 Confirming RCI initialization Page 2.6.6 Making an RCI replacement setting 1 Page Page CHAPTER 3 Command Reference 3.1 setrci of an RCI I/O unit. OPERANDS The following operands are supported: EXTENDED DESCRIPTION zWhen "-c stat" is specified, the following states are displayed: zWhen the RCI state is Active, the following information is displayed after List: Page Page Page EXAMPLE 2: Makes the first RCI setting on the first host in an M8000/M9000 server. EXIT STATUS The following exit values are returned: 3.2 setrcic Page Page CHAPTER 4 Error Status 4.1 setrci error status 4.2 setrcic error status