Fujitsu M3000 2.2 RCI Setup for Initial Installation

2-2 C120-E360-06EN

CHAPTER 2 Setup of the RCI for Operation

2.2 RCI Setup for Initial Installation

This section explains the procedure for initial RCI setup, which assumes RCI settings

have not been configured.

Note: Perform this work when this system is not using any RCI I/O unit.

2.2.1 RCI setup flow

RCI setup for initial installation contains the following steps:

1Confirming RCI initialization

2Connecting RCI cables

3Making an RCI address setting

4Making an RCI construction setting

2.2.2 Confirming RCI initialization

Before connecting an RCI cable to an RCI host, confirm that RCI settings have been

initialized.

• To confirm RCI initialization:

1Execute the setrci (8) command to display the RCI status.

Confirm that "address" is 000f7fff (initial address value).

If RCI settings have not been initialized, perform the next step.

2Execute the setrci (8) command to initialize RCI settings.

XSCF> setrci -c stat

HOST

address 000f7fff

Inactive

The command completed successfully.

XSCF> setrci -c init

The command completed successfully.

Contents

Main Page Page Page Page C120-E360-06EN Preface Audience Glossary Structure and Contents of this Manual Page SPARC Enterprise Mx000 Servers Documentation The manuals listed below are provided for reference. Page Page Abbreviated References to Other Documents Models The model names used in this manual are as follows. Text Conventions This manual uses the following fonts and symbols to express specific types of information. Prompt Notations Syntax of the Command-Line Interface (CLI) Command syntax Fujitsu Welcomes Your Comments Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i CHAPTER 2 Setup of the RCI for Operation . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 CHAPTER 3 Command Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Page Page Page Page CHAPTER 1 RCI Overview 1.1 RCI Features 1.2 RCI Functions Page 1.3 RCI Connection Scheme Page Page CHAPTER 2 Setup of the RCI for Operation 2.1 Overview of RCI Setup 2.2 RCI Setup for Initial Installation 2.2.1 RCI setup flow 2 2.2.2 Confirming RCI initialization 2.2.3 Connecting RCI cables 2.2.4 Making an RCI address setting 1 2.2.5 Making an RCI construction setting 1 2.3 RCI Setup for Addition of an RCI I/O Unit 2.3.1 RCI setup flow 2.3.2 Connecting an RCI cable 2.3.3 Making an RCI expansion setting 1 2.4 RCI Setup for Addition of an RCI Base Cabinet 2.4.1 RCI setup flow 2.4.2 Confirming RCI initialization 2 2.4.3 Connecting an RCI cable 2.4.4 Making an RCI address setting 1 2.4.5 Making an RCI expansion setting 1 2.5 RCI Setup for Replacement of an RCI I/O Unit 3 1 2 3 2.5.3 Replacing an RCI I/O Unit 2.5.4 Making an RCI replacement setting 1 2.6 RCI Setup for Replacement of an RCI Base Cabinet 2.6.1 RCI setup flow 2.6.2 Replacing an RCI host 2.6.3 Confirming RCI initialization Page 2.6.6 Making an RCI replacement setting 1 Page Page CHAPTER 3 Command Reference 3.1 setrci of an RCI I/O unit. OPERANDS The following operands are supported: EXTENDED DESCRIPTION zWhen "-c stat" is specified, the following states are displayed: zWhen the RCI state is Active, the following information is displayed after List: Page Page Page EXAMPLE 2: Makes the first RCI setting on the first host in an M8000/M9000 server. EXIT STATUS The following exit values are returned: 3.2 setrcic Page Page CHAPTER 4 Error Status 4.1 setrci error status 4.2 setrcic error status