Manuals / Brands / Computer Equipment / Server / Fujitsu / Computer Equipment / Server

Fujitsu M3000 2.4.5 Making an RCI expansion setting, 1

1 56

Download 56 pages, 646.92 Kb

2-8 C120-E360-06EN

CHAPTER 2 Setup of the RCI for Operation

2.4.5 Making an RCI expansion setting

The added RCI host must be connected to the RCI network.

The RCI address of the added RCI host is synchronized with those of existing RCI

hosts so that the added cabinet can use RCI functions.

Make an RCI expansion setting on the added RCI host.

Note: Before beginning this RCI setup work, confirm that AC cables are connected

to all RCI units.

Note: To make an RCI expansion setting for an RCI unit equipped with a main line

switch, set the main line switch to the ON position.

• To make an RCI expansion setting:

1Execute the setrci (8) command, and make an RCI expansion setting.

• To confirm an RCI expansion setting:

1Execute the setrci (8) command to display the RCI status.

Confirm that the displayed LIST contents include the added RCI host.

For details on LIST contents, see Chapter 3, "Command Reference."

XSCF> setrci -c addconfig

....................................................

The command completed successfully.

XSCF> setrci -c stat

HOST

address 000102ff

Active

LIST

address pwr alm I/F sys-phase tgry dev-cls sub-cls tm-out

000101ff OFF - ACT - host 0001 0b -

000102ff OFF - ACT - host 0001 0b -

003001ff OFF - ACT - disk 0400 04 -

The command completed successfully.

Contents

Main Page Page Page Page C120-E360-06EN Preface Audience Glossary Structure and Contents of this Manual Page SPARC Enterprise Mx000 Servers Documentation The manuals listed below are provided for reference. Page Page Abbreviated References to Other Documents Models The model names used in this manual are as follows. Text Conventions This manual uses the following fonts and symbols to express specific types of information. Prompt Notations Syntax of the Command-Line Interface (CLI) Command syntax Fujitsu Welcomes Your Comments Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i CHAPTER 2 Setup of the RCI for Operation . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 CHAPTER 3 Command Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Page Page Page Page CHAPTER 1 RCI Overview 1.1 RCI Features 1.2 RCI Functions Page 1.3 RCI Connection Scheme Page Page CHAPTER 2 Setup of the RCI for Operation 2.1 Overview of RCI Setup 2.2 RCI Setup for Initial Installation 2.2.1 RCI setup flow 2 2.2.2 Confirming RCI initialization 2.2.3 Connecting RCI cables 2.2.4 Making an RCI address setting 1 2.2.5 Making an RCI construction setting 1 2.3 RCI Setup for Addition of an RCI I/O Unit 2.3.1 RCI setup flow 2.3.2 Connecting an RCI cable 2.3.3 Making an RCI expansion setting 1 2.4 RCI Setup for Addition of an RCI Base Cabinet 2.4.1 RCI setup flow 2.4.2 Confirming RCI initialization 2 2.4.3 Connecting an RCI cable 2.4.4 Making an RCI address setting 1 2.4.5 Making an RCI expansion setting 1 2.5 RCI Setup for Replacement of an RCI I/O Unit 3 1 2 3 2.5.3 Replacing an RCI I/O Unit 2.5.4 Making an RCI replacement setting 1 2.6 RCI Setup for Replacement of an RCI Base Cabinet 2.6.1 RCI setup flow 2.6.2 Replacing an RCI host 2.6.3 Confirming RCI initialization Page 2.6.6 Making an RCI replacement setting 1 Page Page CHAPTER 3 Command Reference 3.1 setrci of an RCI I/O unit. OPERANDS The following operands are supported: EXTENDED DESCRIPTION zWhen "-c stat" is specified, the following states are displayed: zWhen the RCI state is Active, the following information is displayed after List: Page Page Page EXAMPLE 2: Makes the first RCI setting on the first host in an M8000/M9000 server. EXIT STATUS The following exit values are returned: 3.2 setrcic Page Page CHAPTER 4 Error Status 4.1 setrci error status 4.2 setrcic error status