Manuals / Brands / Computer Equipment / Server / Fujitsu / Computer Equipment / Server

Fujitsu M3000 2.3 RCI Setup for Addition of an RCI I/O Unit

1 56

Download 56 pages, 646.92 Kb

2-4 C120-E360-06EN

CHAPTER 2 Setup of the RCI for Operation

Note: To make an RCI construction setting for an RCI unit equipped with a main

line switch, set the main line switch to the ON position.

• To make an RCI construction setting:

1Execute the setrci (8) command, and make an RCI construction setting.

• To confirm an RCI construction setting:

1Execute the setrci (8) command to display the RCI status.

Confirm that the displayed LIST contents include the connected RCI unit.

For details on LIST contents, see Chapter 3, "Command Reference."

2.3 RCI Setup for Addition of an RCI I/O Unit

This section explains the setup procedure for adding an RCI I/O unit to this system for

which RCI setup for initial installation has already been completed.

This work can be performed while an existing domain is running.

2.3.1 RCI setup flow

RCI setup for addition of an RCI I/O unit contains the following steps:

1Connecting an RCI cable

2Making an RCI expansion setting

XSCF> setrci -c initconfig

....................................................

The command completed successfully.

XSCF> setrci -c stat

HOST

address 000101ff

Active

LIST

address pwr alm I/F sys-phase ctgry dev-cls sub-cls tm-out

000101ff OFF - ACT - host 0001 0b -

The command completed successfully.

Contents

Main Page Page Page Page C120-E360-06EN Preface Audience Glossary Structure and Contents of this Manual Page SPARC Enterprise Mx000 Servers Documentation The manuals listed below are provided for reference. Page Page Abbreviated References to Other Documents Models The model names used in this manual are as follows. Text Conventions This manual uses the following fonts and symbols to express specific types of information. Prompt Notations Syntax of the Command-Line Interface (CLI) Command syntax Fujitsu Welcomes Your Comments Contents Preface . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .i CHAPTER 2 Setup of the RCI for Operation . . . . . . . . . . . . . . . . . . . . . . . . . 2-1 CHAPTER 3 Command Reference. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3-1 Page Page Page Page CHAPTER 1 RCI Overview 1.1 RCI Features 1.2 RCI Functions Page 1.3 RCI Connection Scheme Page Page CHAPTER 2 Setup of the RCI for Operation 2.1 Overview of RCI Setup 2.2 RCI Setup for Initial Installation 2.2.1 RCI setup flow 2 2.2.2 Confirming RCI initialization 2.2.3 Connecting RCI cables 2.2.4 Making an RCI address setting 1 2.2.5 Making an RCI construction setting 1 2.3 RCI Setup for Addition of an RCI I/O Unit 2.3.1 RCI setup flow 2.3.2 Connecting an RCI cable 2.3.3 Making an RCI expansion setting 1 2.4 RCI Setup for Addition of an RCI Base Cabinet 2.4.1 RCI setup flow 2.4.2 Confirming RCI initialization 2 2.4.3 Connecting an RCI cable 2.4.4 Making an RCI address setting 1 2.4.5 Making an RCI expansion setting 1 2.5 RCI Setup for Replacement of an RCI I/O Unit 3 1 2 3 2.5.3 Replacing an RCI I/O Unit 2.5.4 Making an RCI replacement setting 1 2.6 RCI Setup for Replacement of an RCI Base Cabinet 2.6.1 RCI setup flow 2.6.2 Replacing an RCI host 2.6.3 Confirming RCI initialization Page 2.6.6 Making an RCI replacement setting 1 Page Page CHAPTER 3 Command Reference 3.1 setrci of an RCI I/O unit. OPERANDS The following operands are supported: EXTENDED DESCRIPTION zWhen "-c stat" is specified, the following states are displayed: zWhen the RCI state is Active, the following information is displayed after List: Page Page Page EXAMPLE 2: Makes the first RCI setting on the first host in an M8000/M9000 server. EXIT STATUS The following exit values are returned: 3.2 setrcic Page Page CHAPTER 4 Error Status 4.1 setrci error status 4.2 setrcic error status