TABLE 5 XCP Issues and Workarounds (Continued)

ID

Description

Workaround

 

 

 

RTIF1- Using the rebootxscf(8) command may 070418-023 result in a process down error, and possibly an

FMA event with MSG ID SCF-8005-NE.

RTIF1- showaudit all shows a long list of defaults 070418-025 in the policy section after the database is

cleared.

RTIF1- When you have updated the /etc/ttydefs file of 070528-001 Solaris to disable the console flow control, you cannot disable the console flow control on the

telnet via a server.

RTIF1- While XSCF is running, watchdog timeout 070528-002 may occur and XSCF may reboot.

RTIF1- When connected to telnet, the login or the 070802-001 password prompt doesn't appear.

RTIF1- When remote power control mode of

070824-001 interlocking mechanism for power supply to domain, is enabled, after XSCF Unit is replaced, the interlocking for power supply by RCI cannot work.

RTIF1- When the snapshot CLI attempts to write to a 070904-002 USB stick that has write protect set results in

an I/O error.

RTIF1- An incorrect domain state is reported. After 070904-003 the command sendbreak to domain is issued,

showdomainstatus continues to show the state as "Running" when the domain is actually at "ok" prompt.

RTIF1- The latest communication field in 070904-004 showarchiving is not updated regularly.

Ignore this event.

Update the database with the following:

setaudit -a opl=enable

setaudit -a opl=default

None available at this time.

Check that XSCF is started. If not started, use the rebootxscf(8) command to restart XSCF, or stop all the domains and then execute the system power off/on (AC OFF/ON).

Disconnect the telnet session and try again.

After XSCF Unit is replaced, configures the RCI again and sets the remote power control mode.

Do not attempt to use write-protected USB devices for collecting snapshot.

There is no workaround. This is expected behavior of the sendbreak operation.

Disabling and re-enabling archiving refreshes the Latest communication field in showarchiving output.

14 SPARC Enterprise M4000/M5000 Servers Product Notes for XCP Version 1041 • October 2007