TABLE 6 Specific Issues and Workarounds Concerning Solaris (Continued)

CR ID

Description

Workaround

 

 

 

6542632 Memory leak in PCIe module if driver attach fails.

6545685 If the system has detected Correctable Memory Errors (CE) at power-on self-test (POST), the domains might incorrectly degrade 4 or 8 DIMMs.

6546188 The system panics when running hotplug (cfgadm) and DR operations (addboard and deleteboard) on the following cards:

•X4447A-Z, PCI-e Quad-port Gigabit Ethernet Adapter UTP

•X1027A-Z1, PCI-e Dual 10 Gigabit Ethernet Fiber XFP Low profile Adapter

6551356 The system panics when running hotplug (cfgadm) to configure a previously unconfigured card. The message "WARNING: PCI Expansion ROM is not accessible" will be seen on the console shortly before the system panic. The following cards are affected by this defect:

•X4447A-Z, PCI-e Quad-port Gigabit Ethernet Adapter UTP

•X1027A-Z1, PCI-e Dual 10 Gigabit Ethernet Fiber XFP Low profile Adapter

6556742 The system panics when DiskSuite can not read the metadb during DR. This bug affects the following cards:

•SG-XPCIE2FC-QF4, 4Gb PCI-e Dual-Port Fibre Channel HBA

•SG-XPCIE1FC-QF4, 4Gb PCI-e Single-Port Fibre Channel HBA

•SG-XPCI2FC-QF4, 4Gb PCI-X Dual-Port Fibre Channel HBA

•SG-XPCI1FC-QF4, 4Gb PCI-X Single-Port Fibre Channel HBA

There is no workaround. Check for the availability of a patch for this defect.

Increase the memory patrol timeout values used via the following setting in

/etc/system:

set mc-opl:mc_max_rewrite_loop = 20000

There is no workaround. Check for the availability of a patch for this defect.

Perform cfgadm -c disconnect to completely remove the card. After waiting at least 10 seconds, the card may be configured back into the domain using the cfgadm -c configure command.

Panic can be avoided when a duplicated copy of the metadb is accessible via another Host Bus Adaptor. Or you can apply patch 125166- 06.

SPARC Enterprise M4000/M5000 Servers Product Notes 23