TABLE 5 XCP Issues and Workarounds (Continued)

ID

Description

Workaround

 

 

 

RTIF1- Time can't be synchronized with the NTP 070904-005 server.

RTIF1- While executing the domain power-on,

070904-006 domain reset or DR, in case the XSCF reboot occurred, the process may be aborted in some or all of the XSB.

RTIF1- If an invalid SMTP server is configured, a 070912-001 subsequent attempt to disable email service

(using the setemailreport CLI) may block for up to 30 minutes.

Check the stratum value of the NTP server.

The stratum value of XSCF is "5." The NTP server which the XSCF refers to must be a server on which the stratum value is smaller than 5. When you changed the NTP server to refer to, reboot the XSCF.

When the stratum value has been set correctly and the time can't be synchronized, use the showntp(8) command to check the jitter value to be displayed.

If this value is large, please reboot the XSCF.

Execute the domain reset one more time, or power off the domain and then power on again.

Wait for the CLI to complete. The rest of the system will function normally during this time.

•The CLI can also be aborted by ^C. Note that the operation (disabling emailreport) is completed, even if ^C is used.

•showemailreport can be used to confirm that the service has been disabled.

SPARC Enterprise M4000/M5000 Servers Product Notes 15