Interface

Command data structure

Indicates the command received when an error occurs.

Error data structure

Indicates the status register when an error occurs.

Total number of drive errors

Indicates total number of errors registered in the error log.

Check sum

Two's complementary for the lowest-order 1 byte that is obtained by adding 1 byte after another for as many as 511 bytes beginning from the top of the structure.

Status

Bits 0 to 3: Indicates the drive status when received error commands according to the following table.

Bits 4 to 7: Vendor unique

Status

Meaning

0

Unclear status

1

Sleep status

2

Standby status

3

Active status (BSY bit = 0)

4

Off-line data collection being executed

5 to F

Reserved

Table 5.17 Data format of SMART Comprehensive Error Log

Byte

First sector

Next sector

00h

SMART Error Logging 01h

Reserved

01h

Index Pointer Latest Error Data Structure.

Reserved

02h...5Bh

1st Error Log Data Structure

Data Structure 5n + 1

5Ch...B5h

2nd Error Log Data Structure

Data Structure 5n + 2

B6h...10Fh

3rd Error Log Data Structure

Data Structure 5n + 3

110h...169h

4th Error Log Data Structure

Data Structure 5n + 4

16Ah...1C3h

5th Error Log Data Structure

Data Structure 5n + 5

1C4h...1C5h

Total Error Count

Reserved

1C6h...1FEh

Reserved

Reserved

1FFh

Checksum

Checksum

5-54

C141-E258

Page 130
Image 130
Fujitsu MHW2060AC, MHW2040AC manual Command data structure, Error data structure, Total number of drive errors, Status

MHW2060AC, MHW2040AC specifications

The Fujitsu MHW2040AC and MHW2060AC are notable hard disk drives (HDDs) that have been widely used in various computing applications, especially in laptops and compact devices. These models are part of Fujitsu's commitment to providing reliable storage solutions that meet the demands of modern computing.

The MHW2040AC offers a storage capacity of 40 GB, while the MHW2060AC provides a slightly larger capacity at 60 GB. This range of storage makes both models suitable for users looking for dependable space for documents, multimedia files, and software applications. Both drives utilize a 2.5-inch form factor, ideal for mobile computing, as they are lightweight and designed to fit into space-constrained environments.

In terms of performance, both drives operate at a spindle speed of 5400 RPM. This speed strikes a balance between power consumption and performance, making these drives an efficient choice for everyday tasks, such as web browsing and office applications. The drives are equipped with an interface of Ultra ATA/133, which enables faster data transfer rates compared to older models, thereby enhancing overall system responsiveness.

The MHW2040AC and MHW2060AC also incorporate several advanced technologies to bolster their performance and reliability. One such feature is the use of a fluid dynamic bearing (FDB) for the spindle motor, which minimizes noise and vibration, thus improving the overall user experience. Additionally, both drives come with error correction technology that helps maintain data integrity by detecting and correcting errors during read and write operations.

Moreover, these HDDs feature a shock sensor that can detect sudden movements, allowing the drive to park its heads to prevent data loss and hardware damage. This is particularly beneficial in mobile environments where the risks of impact are higher.

Both the MHW2040AC and MHW2060AC are designed with energy-saving features, making them an environmentally responsible choice for energy-conscious consumers. Their low power consumption not only contributes to a reduced carbon footprint but also extends battery life for portable devices.

In summary, the Fujitsu MHW2040AC and MHW2060AC are reliable, efficient, and user-friendly hard disk drives that combine moderate capacities with advanced features designed to enhance performance, ensure data integrity, and extend device longevity. These drives are well-suited for a range of applications, making them a solid choice for users seeking dependable storage solutions.