6.3 Defect Processing

6.2.2 Power commands

The following commands are available as power commands.

IDLE

IDLE IMMEDIATE

STANDBY

STANDBY IMMEDIATE

SLEEP

CHECK POWER MODE

SET FEATURES (APM setting)

6.3 Defect Processing

This device performs alternating processing where the defective sector is alternated with the spare area depending on media defect location information. The media defect location information is registered in the system space specified for the user area according to the format at shipment of the media from the plant.

6.3.1 Spare area

The following type of area is prepared as the spare area in user areas:

1)Spare cylinder for alternate assignment: This cylinder is used during automatic alternating processing for defective sector. More than 2000 sectors/drive.

C141-E258

6-9

Page 249
Image 249
Fujitsu MHW2040AC, MHW2060AC manual Defect Processing, Power commands, Spare area

MHW2060AC, MHW2040AC specifications

The Fujitsu MHW2040AC and MHW2060AC are notable hard disk drives (HDDs) that have been widely used in various computing applications, especially in laptops and compact devices. These models are part of Fujitsu's commitment to providing reliable storage solutions that meet the demands of modern computing.

The MHW2040AC offers a storage capacity of 40 GB, while the MHW2060AC provides a slightly larger capacity at 60 GB. This range of storage makes both models suitable for users looking for dependable space for documents, multimedia files, and software applications. Both drives utilize a 2.5-inch form factor, ideal for mobile computing, as they are lightweight and designed to fit into space-constrained environments.

In terms of performance, both drives operate at a spindle speed of 5400 RPM. This speed strikes a balance between power consumption and performance, making these drives an efficient choice for everyday tasks, such as web browsing and office applications. The drives are equipped with an interface of Ultra ATA/133, which enables faster data transfer rates compared to older models, thereby enhancing overall system responsiveness.

The MHW2040AC and MHW2060AC also incorporate several advanced technologies to bolster their performance and reliability. One such feature is the use of a fluid dynamic bearing (FDB) for the spindle motor, which minimizes noise and vibration, thus improving the overall user experience. Additionally, both drives come with error correction technology that helps maintain data integrity by detecting and correcting errors during read and write operations.

Moreover, these HDDs feature a shock sensor that can detect sudden movements, allowing the drive to park its heads to prevent data loss and hardware damage. This is particularly beneficial in mobile environments where the risks of impact are higher.

Both the MHW2040AC and MHW2060AC are designed with energy-saving features, making them an environmentally responsible choice for energy-conscious consumers. Their low power consumption not only contributes to a reduced carbon footprint but also extends battery life for portable devices.

In summary, the Fujitsu MHW2040AC and MHW2060AC are reliable, efficient, and user-friendly hard disk drives that combine moderate capacities with advanced features designed to enhance performance, ensure data integrity, and extend device longevity. These drives are well-suited for a range of applications, making them a solid choice for users seeking dependable storage solutions.