Fujitsu P1610 manual Dragging, Calibrating the Touch Screen

P Series.book Page 26 Monday, October 9, 2006 10:58 AM

L i f e B o o k P 1 6 0 0 S e r i e s N o t e b o o k

Dragging

Dragging means moving an item with the stylus by touching the screen, moving and then lifting the stylus. To drag, touch the Touch Screen with your stylus on the item you wish to move. While continuing to touch the screen with the stylus, drag the item to its new location by moving the stylus across the screen, and then lifting the stylus to release it. Dragging can also be done using your fingertip. (Figure 2-25)

Figure 2-25 Dragging on the Touch Screen

Calibrating the Touch Screen

In order to ensure accurate tracking between the stylus and cursor, you must run the Touch Screen Calibration Utility before you use the Touch Screen for the first time, or after you change the display resolution and/or orien- tation.

To run the calibration utility:

1.Go to Start -> Control Panel. If you are not in Classic View, select “Switch to Classic View” in the left panel.

2.Windows XP Professional: Double-click the Touch Panel icon and select the Calibration tab. Windows XP Tablet PC Edition: Double-click the Tablet and Pen Settings icon and select the Settings tab.

3.Windows XP Professional: Press the [Calibrate Now] button.

Windows XP Tablet PC Edition: Click the [Calibrate] button.

4.Adjust the display of your notebook to a comfortable angle and find the (+) symbol in the upper-left corner of the display.

Do not use excessive force when tapping on the screen during calibration. Use of excessive force could result in damage to the LCD and/or touch panel.

When using the stylus to calibrate the screen, be sure to avoid touching the screen with your fingers; doing so could result in faulty calibration.

5.Using the stylus, firmly touch the screen directly on the (+) symbol. Lift the stylus from the screen and the target will move to a different location on the screen.

6.Repeat step 4 until you have selected all of the (+) symbols.

7.Once you have selected all the symbols, press the [Update] button (Windows XP Professional) or the [OK] button (Windows XP Tablet PC Edition).

8.Touch the stylus to various points on the screen to verify that the screen is correctly calibrated. If you are not satisfied with the screen’s calibration, press the [Calibrate Now] (or [Calibrate]) button to begin again.

26