Fujitsu P1610 manual Pen Input Problems

P Series.book Page 53 Monday, October 9, 2006 10:58 AM

			T r o u b l e s h o o t i n g
Problem	Possible Cause		Possible Solutions
You have installed an external	Your external device is not prop-		Re-install your device. See “Device Ports” on page 47.
keyboard or mouse, and it	erly installed.
does not seem to work.
	Your operating system software		Check your device and operating system docu-menta-
	is not set up with the correct		tion and activate the proper driver.
	driver for that device.
You have connected an	Your operating system software		Check your device and operating system
external keyboard or a mouse	is not set up with the correct		documentation and activate the proper driver.
and it seems to be locking up	driver for that device.
the system.
	Your system has crashed.		Try to restart your system. If that fails, turn off the
			power by pressing the suspend/resume button for at
			least 10 seconds, and then power back on.
Pen Input Problems
Cursor is not tracking the	The system may be uncalibrated		If the cursor on the screen appears to be misaligned
pen			with the pen or is not accurately tracking the pen,
			calibrate the pen. See “Calibrating the Touch Screen”
			on page 26.
"Ink crossword" application	System has incorrect resolution		This LifeBook model uses a lower resolution than the
doesn’t work properly.			minimum required by the application. The Ink Cross-
			word application (found in Tablet PC Experience Pack)
			cannot be used with this model.
Memory Problems
Power On screen or Info	Your memory upgrade module		Turn off your system. Remove and re-install your
menu of BIOS setup utility	is not properly installed.		memory upgrade module. See “Memory Upgrade
information, does not show			Module” on page 41.
the correct amount of
	You have a memory failure.		Check for Power On Self Test (POST) messages. See
installed memory.
			“Power On Self Test Messages” on page 58.
Modem Problems
Messages about modem	Messages about modem		See your application software documentation for addi-
operation.	operation are generated by		tional information.
	whichever modem application is
	in use.
Modem does not appear to	Modem may not have been		Verify that the modem has been initialized by the oper-
work.	initialized.		ating system. TO do so, right-click on My Computer
			and select the Hardware tab. Click [Device Manager]
			and click on the “+” symbol that appears next to
			Modems. Verify that your device is listed as installed.
USB Device Problems
You have installed a USB	The device is not properly		Remove and re-install the device. See “Device Ports” on
device, but your notebook	installed.		page 47.
does not recognize the
	The device may have been		Close the application and restart your notebook.
device, or the device does not
	installed while an application
seem to work properly.
	was running, so your system is
	not aware of its installation.
	Your software may not have the		See your software documentation and activate the
	correct driver active.		correct driver.
		53