ATTENTION
Depending on the operating system you are using, you may need to do the follow- ing.
Windows 2000:
If you see the [Digital Signature not Found] dialog box, click the [Yes] button. Windows Vista:
If you see the [Found New Hardware] dialog box, select [Locate and install driver software], and then in the [User Account Control] dialog box, click the [Continue] button, if it is displayed.
■Installing the FUJITSU ISIS Scanner Driver
Screenshots taken in Windows XP are
HINT | used as examples. The displayed windows |
| |
| and operations may slightly vary depending |
| on the operating system you are using. |
1.Press the power button to turn on the scanner.
2.Turn on your personal computer, and then log on to Windows..The installation of FUJITSU TWAIN 32 is complete. Next, install ScandAll PRO
ATTENTION
Be sure to log on as a user with "Adminis- trator" privileges.
ATTENTION
To make sure that FUJITSU TWAIN 32 is successfully installed, perform a scan with a
3.When the scanner is automatically detected, [Found New Hardware Wizard] or [Add/ Remove Hardware Wizard] dialog box will appear. Click the [Cancel] button to close the Wizard dialog box.
FUJITSU ISIS is an
■Preparations
Do the following before installing the application:
| • Unpack the Setup |
insert the Setup |
| yet. |
⇒<SETUP DISK START UP SCREEN> appears.
| • Connect the scanner correctly to your per- |
| sonal computer. |
For details on how to connect the scanner,
HINT | refer to section 2.2 "Connecting the Scan- |
| |
|
ATTENTION
The [SETUP DISK START UP SCREEN] may not appear if the "AutoPlay" setting is set to off. In this case, find "Install.exe" in the
| 7 | |
|