5.Click [INSTALL PRODUCTS], and then click [ISIS Driver].

Your computer will restart and detect the scanner. Do not remove the Setup CD-ROM from the CD drive until your personal computer completely starts up again.

6. Error Recovery Guide Installation dialog box
appears.

ATTENTION

Depending on the operating system you are using, you may need to do the follow- ing.

Windows 2000:

If you see the [Digital Signature not Found] dialog box, click [Yes]. Windows Vista:

If you see the [Found New Hardware] dialog box, select [Locate and install driver software], and then in the [User Account Control] dialog box, click the [Continue] button, if it is displayed.

Error Recovery Guide is an application with
which you can view on-screen information for
troubleshooting errors that may occur in the
scanner. This guide helps solve problems, so
The installation of FUJITSU ISIS is complete. Next, install ScandAll PRO.
select [Yes] to install it. You may also choose
to install it later.

ATTENTION

To make sure that FUJITSU ISIS is successfully installed, perform a scan with a TWAIN-compliant application such as ScandAll PRO. For information about how to scan with ScandAll PRO, refer to sec-

ATTENTION

After you select [Yes] for installing Error Recovery Guide, the [Choose Setup Lan- guage] dialog box appears. Select a language and follow the on-screen instructions. The Error Recovery Guide dialog box is automatically displayed when the installation is complete. Wait until the installation of the ISIS starts.

7.Select a language for the installation on the [Choose Setup Language] dialog box, and then click the [Next] button.

■Installing ScandAll PRO

ScandAll PRO is software for scanning images, which is in conformity with both TWAN/ISIS standards. Using FUJITSU TWAIN 32 or FUJITSU ISIS together with ScandAll PRO allows you to create document images.

ATTENTION

Be sure to log on as a user with "Adminis- trator" privileges.

8.Install the driver, following the on-screen instructions.

9.When you see the [InstallShield Wiizard Com- plete] dialog box, click the [Finish] button.

1.Insert the Setup CD-ROM into the CD drive.

⇒<SETUP DISK START UP SCREEN> appears.

2.Click [INSTALL PRODUCTS], and then click [ScandAll PRO].

3.Select a language for the installation on [Choose Setup Language] dialog box, and then click the [OK] button.

8