Fujitsu P3PC-1932-01EN ■Temporary error, ■Device alarm (Permanent error), AP-3, •"U1" error, •"U2" error, •"U6" error, 1.Remove jammed documents

■Temporary error

Indication	Meaning
U1	A paper feed error occurred.
U2	A multi feed error occurred.
U6	The print cartridge is not set.

The following shows the procedure for releasing of each temporary error.•"U1" error1.Remove jammed documents.

(For details, refer to section 5.1 "Removing Jammed Documents" of "fi-5530C2 Opera- tor’s Guide on the Setup CD-ROM..)

2.Confirm that the documents meet the paper conditions for scanning.

(For details, refer section 6.2 "Document Quality" of "fi-5530C2 Operator’s Guide" on the Setup CD-ROM.)

•"U2" error

Press the [Send to] button on the Operator Panel. The papers that were multi fed will be ejected.

•"U6" error

This is a temporary error related with the Imprinter option (sold separately). For details, refer to chapter 5 "Error Message" of "fi-553PR Operator's Guide."

■Device alarm (Permanent error)

Indication	Meaning
E2	Trouble in the optical system (front).
E3	Trouble in the optical system (back).
E4	The motor fuse has blown out.
E6	Trouble in the operator panel.
E7	Trouble occurred in the internal memory
	(EEPROM).
E8	The SCSI interface fuse has blown out.
E9	An error in the image memory.
Ec	An alarm in the memory.
Ed	Trouble in the SCSI interface controller.
EF	A trouble in the Background switching
	mechanism.

When you encounter any alarm, turn off and on the scanner. If the alarm is still displayed on the Function Number Display, contact the store where you purchased the scanner or an authorized FUJITSU scanner service provider.

AP-3