BASIC OPERATIONS

Power ON

 

 

VOL (Volume)

1

Press/I to the ONstate.

 

Press Oto increase the volume.

The power lamp lights up. (See P. E-7.)

 

Press Pto reduce the volume.

2

Press

.

 

 

 

 

 

 

 

 

 

 

 

 

The power is turned on, and the power lamp changes

 

 

 

 

 

 

 

 

 

 

 

 

 

from “Red” to “Green.”

 

 

 

 

 

 

Select the Video, RGB, or TV mode to enable ordinary operation.

Power OFF (Standby State)

1

Press

when the power is “ON”.

The power lamp changes from “Green” to “Red” and

the display becomes the standby state.

When the volume adjustment button is pressed

*Note that the volume level remains stored even when you turn OFF the power.

*Volume menu will not be displayed when “No Audio” is selected. (See P. E-36.)

*An audio signal from an audio output terminal (AUDIO OUTPUT DIGITAL or AUDIO OUTPUT ANALOG) does not change.

MUTE

Press K.

The audio is removed.

Press again to restore the audio to the original level. The mute mode can also be released by pressing O or P.

* An audio signal from an audio output terminal (AUDIO OUTPUT DIGITAL or AUDIO OUTPUT ANALOG) does not change.

Note

•If the operation is not executed for about 60 seconds, the menu disappears.

•Some functions are not available depending on the state or condition of use.

E-18