INSTALLATION

To prevent the display’s internal components from overheating, make sure that the display is installed in a well-ventilated location.

Be sure to use the Fujitsu General Limited’s optional stand, wall-mounting unit or the other mounting unit when installing the display. Also, be sure that your dealer performs the installation.

See the appropriate instruction manual for additional information on the mounting hardware you select.

To prevent an accident and ensure safety in the event of an earthquake, fix the display securely into the position as described below.

Use the diagram below to determine how much space is needed to ensure proper heat radiation. This is a minimum space requirement; therefore, provide at least as much space as indicated below.

*Make sure that the display is installed in a location where the temperature can be maintained between 0°C and 40°C (between 32°F and 104°F)

*Never attempt to tilt the display sideways or backward.

*To prevent the power cord and other cables from being accidentally pulled, make sure that they run along the wall or through corners.

*To prevent accidents and ensure safety in the event of an earthquake, secure the display to prevent it from tipping over.

*When placing with the display surface down, lay the body on a flat surface covered with a thick towel, etc. so as not to scratch the display surface. Also be careful that the display does not tip over. Don’t place with the back facing down, because there are projections on the back. (For 65” model)

Display Section

 

Front

 

Side

 

 

 

 

 

 

 

Upper

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

37” model

Left

Right

Wall

Lower

Upper

65” model

Left

Right

Wall

Lower

English

Note

•The external view is meant to be a representation of the actual unit and is not to scale; therefore, it may differ from the actual shape and size of the product.

•Due to the fragile and highly precise equipment, it is very important to pack properly before transportation using only the packing materials provided.

•Cables for connecting the display to external equipment are not supplied. Contact your dealer for more information on these supporting products.

Reference

The speakers and stand of the 65” model are optional.

•See P. E-44for more information on options.

E-5