You can change the settings for indications for RGB inputs and video inputs.
RGB inputYou can change the settings for indications for the RGB inputs. Select the desired indication in accordance with the connected equipment.
Each time cor dis pressed, the setting is switched. (In the case of RGB 1)
RGB1 PC1 PC2 DVD1 DVD2
STB Satellite Cable TV
Press Zto store.
Video inputYou can change the settings for indications for the VIDEO inputs.
Select the desired indication in accordance with the connected equipment.
Each time cor dis pressed, the setting is switched. (In the case of VIDEO1)
Video1 DVD1 DVD2 VCR1 VCR2
GAME Camcorder STB Satellite
Cable TV
Press Zto store.
Input Terminal
“Input Terminal” screen
You can use this option to select the signal system it will receive to
(1)Select
(2)Select the signal system to receive.
Each time you press cor d, one of the available choices appears in the following sequence:
(3)Press Zto store.
Video1 or Video2 Input terminalFunctionSelect the video input format.
Each time cor dis pressed, the setting is switched.
Video
Press Zto store.
Video FormatYou can use this option to select the video format appropriate for the input signal.
Each time you press cor d, one of the available modes appears in the following sequence:
Auto NTSC PAL SECAM PAL60
[Auto]: Automatically selects NTSC, PAL, SECAM, PAL60,
[Other than Auto]: You need to select a system appropriate to the input signal.
Press Zto store.
Póññêèé Português Italiano Français Español Deutsch English
中文
Note
•If the operation is not executed for about 60 seconds, the menu disappears.
•Some functions are not available depending on the state or condition of use.
•The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.
•Depending on the type of signal, it may not be possible to make some of the settings or adjustments.
日 本 語