WATCHING TV, VIDEO, OR PICTURES ON PC

English

TV/DTV

Select the TV mode to watch analog TV broadcasts (ATV) and digital terrestrial TV broadcasts (DTV).

1 Press ".

Each time this button is pressed, analog TV and digital terrestrial TV are switched to each other. When “DTV” was displayed at the top right side of the screen when the broadcast was switched, it is digital terrestrial TV and when “A:**” was displayed, it is analog TV.

2

Switch to the channel you want to

 

 

watch.

There are the following 2 switching methods:

•Use 1to 9and 0to select the channel.

•Use Mor Nto switch the channel.

*For more information, see “BASIC CONNECTION AND PREPARATION OF THE SYSTEM” P. E-14.

P RETURN (PROGRAM RETURN)

The program can be toggled back to a previous channel, video input or RGB input.

Press X.

The program reverts to the channel viewed immediately before the present channel. If the previous content was from another video input, the video mode reverts to that input.

VIDEO

Press #.

You can select from VIDEO1 mode to VIDEO6 mode.

The video modes corresponding to each input terminal are as follows.

•VIDEO1: SCART

•VIDEO2: SCART

•VIDEO3: Component Video

•VIDEO4: Component Video

•VIDEO5: HDMI

•VIDEO6: HDMI

Video1 mode

*For selection of the input terminal, see “Input Terminal” on P. E-35.

*You can also change VIDEO mode by pressing 1– 6during “Video” indication on the screen by pressing #.

RGB

Press $.

The input terminal of RGB mode is as follows.

• RGB1: mD-sub.

RGB1 mode

* For selection of the input terminal, see “Input Terminal” on P. E-35.

About LOCK (Channel Lock)

•The Lock function allows parents to block viewing of programs considered unsuitable for children.

•Use “CHANNEL MANAGER” on P. E-41to set Lock (Channel Lock) for each channel.

E-19