DIGITAL TV MODE SETTING (TV MENU) (Continued)

SYSTEM CONFIGURATION

Time Setup•Time Mode

It is switched each time cor dis pressed.

•Password change

The password can be changed by entering the passwords in Old Password, New Password, Confirm Password order.

Make a note so as not to forget the modified password.

Auto Manual

Normally use at Auto.

•UTC Offset

UTC Offset becomes effective when “Manual” was selected by Time Mode. This function is used when the received TV broadcast setup time is in the UTC mode.

Press cor dto adjust the offset.

The offset can be adjusted over the +12:00 to -12:00 range.

COMMON INTERFACE

Displays the information on the Smart Card when a Smart Card is inserted. The contents and operation procedure vary depending on the card company.

•Module information

The module information can be checked.

•Smart Card information

The information can be checked.

•Language
Password Setup

Displays the password input screen.

“Enter Password” input screen

Enter the registered password.

*The factory set password is “0000”.

•Password Mode

The language in which the Smart Card information is displayed can be selected.

*The language which can be selected varies depending on the card company.

•Software Download

When there is new software, it can be downloaded.

This mode sets whether or not the password input screen is to be displayed when the password input is requested.

It is switched each time cor dis pressed.

Always None Once

[Always]: Password input screen is always displayed.

[None]: Password input screen is not displayed.

[Once]: Password input screen is displayed once only. (When once set to standby, the password input screen is displayed again.)

•Parental Lock

Viewing restrictions by age can be set for programs to be viewed. When a program with a viewing restriction was received, the programs of the set age or younger cannot be viewed.

It is switched each time cor dis pressed.

None 4 5 6 • • • • • 18

*The “Parental Lock” menu may not be displayed depending on the broadcast station.

NOTE -Parental Lock

•When an operation other than the specified operation is performed while the Password input screen was displayed, the screen may become blank or “Locked Service” screen may be displayed. In this case, press Mor Nand reset to the channel you want to watch.

E-42