Direct Setting (RGB)

You can use this option to switch the setting for RGB input signal.

Each time you press cor d, one of the available choices appears in the following sequence:

Auto VGA WVGA 480P XGA

WXGA SXGA SXGA+

[Auto]: The optimum display is obtained automatically for input signals.

[Others]: The optimum resolution setting is fixed for each signal.

Press Zto store.

*In Auto mode, the resolution of VGA, WVGA, 480P, XGA, WXGA, SXGA and SXGA+ may not be automatically distinguished. Switch to the fixed display when the image is not displayed properly.

*Signals that are not applicable depending on the model or input terminals may not be displayed.

Code Setting (RGB)

Normally, use this option in Auto mode.

White Screen

You can use this option to display white over the entire screen to minimize phosphor burn-in.

Each time you press cor d, one of the available choices appears in the following sequence:

Off On

Press Zto store.

Background
Information

Displays system operation status.

Select “Information” and press Z.

The “Information” screen will appear.

[Mode]: Input mode appears at the upper right corner of the screen

[Freq. Scan Mode]: Frequency scanning

[Input Signal]: Video mode[Input Sync.]: Signal type

[Freq.]: Synchronized signal frequency, polarity

[Preset No.]: RGB code number

“Information” screen (example of Video1 mode)

Póññêèé Português Italiano Français Español Deutsch English

When the screen size was set to “Normal”, to reduce “burn-in”, the brightness of the part at which left and right images are not displayed can be set. Normally, we recommend that “Light Gray” be used.

Each time you press cor d, the settings is switched.

Black Dark Gray Light Gray

Press Zto store.

*Effective for plasma display.

*Burn-in can still occur if the Normal mode is shown for extended periods.

Note

•If the operation is not executed for about 60 seconds, the menu disappears.

•Some functions are not available depending on the state or condition of use.

•The adjustment range varies according to the display signals. Make adjustments to your preferred picture quality within the adjustment range.

•Depending on the type of signal, it may not be possible to make some of the settings or adjustments.

中文

日 本 語

E-37