INITIALIZATION OF USER ADJUSTMENT VALUE
You can restore the values of the adjustment/setting made in | Press Z. | ||
the MENU to factory settings. | 4 • Displays the message of whether to proceed with the | ||
1 | Press Y. | ||
initialization. | |||
The main menu screen will appear. |
| ||
Displays the message of whether to proceed the initialization
2 | Press aor bto select “Display |
Menu” and press dor Z. |
“Display Menu” selected in the main menu screen
3 | Press aor bto select “FACTORY | |
| DEFAULT” and press dor Z. | ||
| Each time you press aor b, one of the available | |
| menus appears in the following sequence: | |
| PICTURE | AUDIO POSITION/SIZE |
| FEATURES | FACTORY DEFAULT |
The “FACTORY DEFAULT” menu screen will appear.
5 | Press aor bto select the “Yes”. |
6 | Press Z. |
Displays the message of having completed the initialization
•The message of having completed the initialization will be displayed after initializing.
7 Press Yor hwhen you finish.“FACTORY DEFAULT” selected in the main menu screen
Note
•If the operation is not executed for about 60 seconds, the menu disappears.
•Some functions are not available depending on the state or condition of use.
•The adjustment range varies depending on the display signal. Adjust to a desired picture quality in the allowable adjustment range.
•Setting and adjustment may be disabled depending on the signal type.
•If a new setting is made for Tuner (digital terrestrial TV), it cannot be changed back to the factory default again.