PART NAMES AND FUNCTIONS

English

DISPLAY SECTION – FRONT

37” model

Bottom of the display

 / I power button

If this button is pressed when the power indicator lamp is off, the indicator lamp will light.

The power can be turned on and the standby mode selected by using the remote control or the control panel of the display.

If this button is pressed when the power indicator lamp is lit, the indicator lamp will go out.

*Power is still supplied to parts of the display even if the indicator lamp is off.

Input mode selection button

Switches the input modes (TV mode, Video mode, and RGB mode).

Volume button

Adjusts the sound volume.

Wide screen selection button

Switches the screen over to a desired wide screen.

Power indicator lamp

This lamp shows the state of the power supply.

Lit (red):

Standby state

Lit (green):

Power ON state

Flashing (red or green):

Malfunction (Flashes differently

 

depending on the type of malfunction.)

ON/OFF button

Turns the power “ON” and “OFF (standby state)”.

Remote control signal receiver

Receives the signals from the remote control.

Ambient Sensor

Detects the brightness of ambient light.

It is important not to obstruct it for full functionality of the feature.

65” model

Right side of the display

 

Warning

If the power indicator lamp flashes red or green, this signifies that the display has developed a problem. When this happens, be sure to remove the power plug from the receptacle and contact your dealer. In this circumstance, leaving the display power ON can result in fire or electric shock.

E-7