Fujitsu P37FT05AEB, P65FT00AEB [On], [On], Note, Gamma, [Off], [Off], •Low Point, •High Point, ALC Setting, Low Point Gain, •Jaggies Filter, •Motion Setting, •Low Point Gain

ADJUSTING TO A DESIRED PICTURE (PICTURE MENU) (Continued)

•Jaggies Filter

This function alleviates the phenomenon where jagged diagonal lines can be seen when interlace signals are input, thus enabling a smoother motion picture display.

Each time cor dis pressed, the setting is switched.

Auto Off

Press Zto store.

•Motion Setting

The detecting sensitivity for motion picture is set.

The response of the picture processing is valued in the motion picture priority setting.

Press d: to specify still picture priority.

Press c: to specify motion picture priority. Press Zto store.

Gamma

You can create your favourite image by fine tuning the brightness.

•High Point

In a bright image scene, sets the point where the brightness is to be adjusted.

Press cor dto set the point where the brightness is to be adjusted.

Press Zto store.

•High Point Gain

Fine tunes the brightness of the point set by High Point. Press cto be darker.

Press dto be brighter. Press Zto store.

•Low Point

In a dark image scene, sets the point where the brightness is to be adjusted.

Press cor dto set the point where the brightness is to be

adjusted.

Press Zto store.

•Low Point Gain

Fine tunes the brightness of the point set by Low Point. Press cto be darker.

Press dto be brighter. Press Zto store.

ALC Setting

•This function allows setting of the screen to your favourite luminance matched to the ambient brightness.

•The ALC Setting function operates when the ambient sensor is turned on. (See “Ambient Sensor” on P. E-27.)

•High Point Level

Sets the upper limit value of the ambient brightness detected by the ambient sensor.

Press cto lower the upper limit value. Press dto raise the upper limit value. Press Zto store.

•High Point Gain

Sets the upper limit value of the screen luminance corresponding to the brightness detected by the ambient sensor in a bright environment.

Press cto lower the upper limit value. Press dto raise the upper limit value. Press Zto store.

•High Point Limit

Limits control of the screen luminance corresponding to the ambient sensor when the value detected by the ambient sensor

exceeds the High Point Level and High Point Gain. Each time cor dis pressed, the setting is switched.

[On]: Limit operates

[Off]: Limit does not operate Press Zto store.

•Low Point Level

Sets the lower limit value of the ambient brightness detected by the ambient sensor.

Press cto lower the lower limit value. Press dto raise the lower limit value. Press Zto store.

•Low Point Gain

Sets the lower limit value of the screen luminance corresponding to the brightness detected by the ambient sensor

in a dark environment.

Press cto lower the lower limit value. Press dto raise the lower limit value. Press Zto store.

•Low Point Limit

Limits control of the screen luminance corresponding to the ambient sensor when the value detected by the ambient sensor

is lower than the Low Point Level and Low Point Gain. Each time cor dis pressed, the setting is switched.

[On]: Limit operates

[Off]: Limit does not operate Press Zto store.

Note

•There are the following conditions at the settable value: High Point Level > Low Point Level

High Point Gain > Low Point Gain

E-30