Fujitsu PG-DTA101 manual Administrator Alert

NOTE:

Stick magazine and cartridge labels firmly in their proper locations. To avoid jams, use labels according to the guidelines below:

•Do not use a magazine or a cartridge whose label has peeled off.

•Make sure that labels are not sticking out of their proper locations.

•Make sure that labels on cartridges are not folded on their ends.

•Do not stick labels on top of other labels.

3)The autoloader automatically checks which magazine slots contain cartridges. This process takes about 20 seconds.

Notes When Using Windows 2000

Read the following if your operating system is Windows 2000.

The autoloader will not be properly detected if the magazine is not installed in- side the autoloader when the system starts up. The following error will be dis- played.

**ADMINISTRATOR ALERT**

Configuration for device Changer0 failed. See the event log for more details.

Looking at the event viewer’s system log will show the following error for Remov- able Storage Service.

Unable to auto-configure library unit Changer0. The current setup of the library unit does not support au- tomatic configuration. You will either have to modify the current setup of the library to adhere to automat- ic configuration guidelines (if possible) or manually configure the device.

When such an error occurs, install the magazine into the autoloader and restart the server. Alternatively, you can follow the steps below to restart the Removable Storage Service:

(1)Click the [Start] button, point at [Programs] and then [Administrative Tools]. Then select [Services].

(2)Double-click [Removable Storage].

(3)Click the [Stop] button.

(4)Install the magazine into the autoloader.

(5)Click the [Start] button.

E

4 Using Cartridges

13