Tape Stuck

E

Flashing

The cartridge is stuck in the drive.

 

 

 

Action: Try forcing ejection. If this fails, call for ser-

 

 

 

vice.

 

 

 

 

Unloading

S

Either the drive is unloading a cartridge, or a car-

 

 

 

tridge is being ejected from the drive and replaced in

 

 

 

the magazine.

 

 

 

 

UpgradeErr

E

Flashing

An error occurred while upgrading the firmware.

 

 

 

 

Worm Media

E

Flashing

A high error rate has been detected while writing,

 

 

 

suggesting that the tape is nearing the end of its

 

 

 

useful life.

 

 

 

Action: Copy any data you wish to keep from the

 

 

 

cartridge onto a new cartridge and discard the old

 

 

 

cartridge.

 

 

 

 

Write x.y

S

The drive is writing data to tape. “x.y:1” is the cumu-

 

 

 

lative compression ratio since power-on, or since

 

 

 

the compression ratio was last cleared. For exam-

 

 

 

ple, “Write 2.1” means a compression ratio of 2.1:1.

 

 

 

The compression ratio will only be displayed if 1 MB

 

 

 

or more data has been written since power-on.

 

 

 

 

Write Fail

E

Flashing

A WRITE, WRITE FILEMARK or ERASE command

 

 

 

has failed.

 

 

 

Action: Use a new cartridge.

 

 

 

 

Write Fail:

E

Flashing

The drive could not write to the tape, which may be

Clean or Use New

 

 

worn or damaged.

Tape

 

 

Action: Insert a cleaning cartridge to clean the tape

 

 

 

heads, ensuring that the tape in the cleaning car-

 

 

 

tridge has not been used up, or use a new cartridge.

 

 

 

 

Write Protected

E

Flashing

A WRITE, WRITE FILEMARK or ERASE command

Tape

 

 

has been attempted on a write-protected cartridge.

 

 

 

Action: Remove the cartridge and change it to write-

 

 

 

enabled.

 

 

 

 

Wrong FW

E

Flashing

The upgrade firmware is not compatible. The origi-

 

 

 

nal firmware is not changed or modified.

 

 

 

 

26

Page 67
Image 67
Fujitsu PG-DTA101 manual Lative compression ratio since power-on, or since