Fujitsu RX600 S4 manual Laser information

Safety instructions

ILaser information

The CD/DVD drive complies with IEC 60825-1 laser class 1.

VCAUTION!

The CD/DVD drive contains a light-emitting diode (LED), which under certain circumstances produces a laser beam stronger than laser class 1. Looking directly at this beam is dangerous.

Never remove parts of the CD/DVD drive casing!

Modules with electrostatic-sensitive components

Systems and components that might be damaged by electrostatic discharge (ESD) are marked with the following label:

Figure 1: ESD label

When you handle components fitted with ESDs, you must observe the following points under all circumstances:

●Remove the power plug before installing or removing components containing ESDs.

●You must always discharge yourself of static charges (e.g. by touching a grounded object) before working.

●The equipment and tools you use must be free of static charges.

●Only touch the components at the positions highlighted in green (touch points).

●Do not touch any exposed pins or conductors on a component.

●Use a grounding cable designed for this purpose to connect yourself to the system unit as you install components.

RX600 S4 Options Guide 15