10 Completion

VCAUTION!

Make sure you observe the safety notes in the chapter “Safety instruc- tions” on page 11ff.

10.1Closing the server

Figure 29: Mounting the housing cover

ÊPosition the cover on the server in such a way that the rear edge protrudes 1-2 cm from the housing (see circle).

ÊPush the housing cover forward as far as possible.

ÊFasten the housing cover to the front of the system with the two captive screws (see page 18).

ÊInstall the server in the rack.

IThe relevant procedure is described in the operating manual.

ÊFasten the server in the rack cabinet using the knurled screws.

ÊPlug in the power plugs and switch the server on.

RX600 S4

Options Guide

47

Page 47
Image 47
Fujitsu RX600 S4 manual Completion, Closing the server