2 Procedure
VCAUTION!
●The actions described in this manual should only be performed by engineers, service personnel or technical specialists.
●Equipment repairs must only be performed by qualified staff.
●Any failure to observe the guidelines in this manual, and any unautho- rized opening or improper repairs could endanger the user (through electric shock, fire hazards) or damage the equipment.
●Please note that any unauthorized opening of the server will void the warranty and exempt the manufacturer from all liability.
ÊFirst of all please familiarize yourself with the safety instructions in the chapter “Safety instructions” on page 11ff.
ÊMake sure that all the manuals you need (see “Additional documentation about the server” on page 6) are available, printing out the PDF files if necessary.
You will definitely need:
–the operating manual for the server,
–the service supplement for the server, and
–the technical manual for the system board.
ÊShut down the server correctly, switch it off, pull out the power plugs, and open the server as described in the chapter “Preparation” on page 17f.
ÊExtend or upgrade your server as described in the relevant chapter.
IThe installation and removal of the
ÊClose the server, plug in the power plugs, and switch on the server as described in the chapter “Completion” on page 47f.
ÊStart the operating system and, if necessary, configure it as required (see the operating manual).
RX600 S4 | Options Guide | 9 |
