Manuals / Brands / Computer Equipment / Scanner / Fujitsu / Computer Equipment / Scanner

Fujitsu S510M ■Connecting the USB Cable, USB cable, Connect the USB cable as shown below, 3.The connection of the USB cable is complete

1 35

Download 35 pages, 1.6 Mb

■Connecting the USB Cable

Connect the USB cable as shown below.

ATTENTION

•Use only the USB cable supplied with the ScanSnap.

•When connecting to a USB hub, be sure to connect the ScanSnap to the hub pluged into the computer (first stage). If you connect it to a USB hub connected to another USB hub (second stage), the ScanSnap may not function correctly.

•If you connect the ScanSnap with USB 2.0, it is required that the USB port and the Hub be compliant with USB 2.0. The scanning speed may slow down when you connect the ScanSnap with USB 1.1. If your computer has the USB 2.0 compatible port, use it.

1. Remove the seal on the back side of the ScanSnap.

DC 16V

USB connector

Seal

2.Connect the USB cable to the USB connector on the ScanSnap, and the other end of the USB cable into the USB port on your computer.

Insert the USB cable into the connector all the way to the end.

USB cable

3.The connection of the USB cable is complete.

Then, follow the procedure described in "Turning the ScanSnap ON" (page 18).

17

Contents

Chapter 1 Preparation Chapter 2 Connecting the ScanSnap Chapter 3 How to Use the ScanSnap Chapter 4 Troubleshooting Chapter 6 Consumables Introduction Manufacturer Trademarks How Trademarks Are Indicated In This Manual ScanSnap and the Manuals About Mouse Operations Regulatory Information FCC declaration Canadian DOC Regulations Bescheinigung des Herstellers / Importeurs International ENERGY STAR® Program Use in High-SafetyApplications About the use of mercury Safety Precautions Warning Indications Used in This Manual Symbols Used in This Manual Screen Examples in This Manual About Maintenance About the Hot Surface Hazard Warning Label Page The following illustrates important cautions described in this manual Chapter 1 Preparation 1.1 Using the ScanSnap Manuals 1.2 Names and Functions of Components ■Front view ■Operation button ■Rear view Chapter 2 Connecting the ScanSnap 2.1 Installing the Supplied Software ■Installing Adobe Acrobat ■Installing ABBYY FineReader for ScanSnap ■Installing Cardiris ■Installing ScanSnap Manager 2.2 Connecting the ScanSnap to Your Computer ■Connecting the Power Cable ■Connecting the USB Cable ■Turning the ScanSnap ON Chapter 3 How to Use the ScanSnap 3.1 Scanning Settings 3.2 Scanning Documents 2.Adjust the side guides to the width of the loaded document 3.Press the [SCAN] button ⇒Scanning is started ⇒The ScanSnap Quick Menu appears after scanning 3.3 Scanning with the Carrier Sheet ■Creating Facing Pages in One Image ■Scanning Irregular-shapedDocuments 4. Open the Carrier Sheet and place the document inside Neatly align the top of the material with the top of the Carrier Sheet Center the material so that it is entirely contained in the Carrier Sheet 5.Load the Carrier Sheet onto the ScanSnap •Place the Carrier Sheet so that the back side of it faces up 3.4 Scanning Business Cards using Cardiris 3. Check the image data of the scanned business cards in the Cardiris window The images of each business card are displayed on the right 4.Should there be any recognition errors, correct the data manually Correct misrecognized characters ⇒The following window appears 6. On the [Format:] pop-upmenu, select "Address Book 7.Click the [OK] button 8.Click the [Send] button or select [Process] - [Send] on the menu bar 9. On the menu bar, select [Cardiris] - [Quit Cardiris] to quit Cardiris Chapter 4 Troubleshooting 4.1 Clearing Paper Jams 4.2 Troubleshooting Checklist The latest information, which is updated on an Chapter 5 Daily Care 5.1Cleaning Materials 5.2 Cleaning the ScanSnap Exterior 5.3 Cleaning Inside of the ScanSnap 5.4 Cleaning the Carrier Sheet Chapter 6 Consumables 6.1Part Numbers and Replacement Cycle of Consumables 6.2 Purchasing the Carrier Sheet