Pull out the extension of the paper chute to scan long-size documents.

HINT

Extension

Paper chute

2.Adjust the side guides to the width of the loaded document.3.Press the [SCAN] button.Scanning is started.The ScanSnap Quick Menu appears after scanning.

4.Select a desirable action in the ScanSnap Quick Menu for the image of the scanned document.

HINT

The scanning method above is for the case where the "Quick Menu Mode" is applied.

If you switch to the "Profile Mode," you will be able to perform the scanning operation with the specified application without the ScanSnap Quick Menu displayed. You can also switch to any settings for scanning if you register scanning configurations to the "Select a Profile" window in advance. When you become accustomed to the ScanSnap operation, switch the Operation Mode during operation when needed.

The Operation Mode can be switched by clicking and holding the ScanSnap Manager icon

on the Dock menu and then marking [Use Quick Menu].

The ScanSnap can scan documents using various settings.

Refer to "Chapter 3 Using the ScanSnap" of "ScanSnap S510M Operator's Guide" to learn more.

21