Fujitsu S510M 3.2 Scanning Documents, ⇒The new settings are enabled, 1.Load the documents onto the paper chute, 3.Click the [Apply] button to finish the configuration

2.Change the scanning settings on the "ScanSnap Manager - Scan and Save Settings" window.

You can update your last-saved settings for scanning when [Settings] is selected.

There are six tabs used to configure the scan options at maximum (The number of tabs displayed and items that can be configured vary depending on the operation mode.)

3.Click the [Apply] button to finish the configuration.⇒The new settings are enabled.

3.2 Scanning Documents

This section describes how to scan the documents generally used in most offices. The ScanSnap can scan the documents in various sizes.

For details of how to scan documents, refer to "Chapter 3 Using the ScanSnap" of "ScanSnap S510M Operator’s Guide."

1.Load the documents onto the paper chute.

Load the document so that the front side of the two-sided document (the first page when the document contains more than one sheet) faces the paper chute.

Do not load the document beyond the reference marks on the side guide.

12
34
		56
			78
A				90
BC
	D
		E
			FG

Reference mark

Paper chute

Side guide

ScanSnap S510M Getting Started 20