Working with the Tablet PC

Switching the wireless components on and off

WLAN/Wi-Fi and Bluetooth

Select Settings.

Set the switch for WLAN/Wi-Fi or Bluetooth to ON.

Click on WLAN/Wi-Fiand select your preferred network.

Click on Bluetooth and select the Bluetooth device with which you would like to connect your Tablet PC.

Pay attention to the additional safety notes for devices with radio components provided in the "Safety/Regulations" manual.

You can obtain more information on UMTS from your service provider.

UMTS

Select Settings > More... > Mobile networks.

Choose your preferred network.

Access via UMTS

Your system contains an integrated UMTS module. You will enjoy the best reception and the highest energy efficiency, completely free of troublesome cables or antennas. The UMTS module is immediately ready for use.

You will find information on establishing the connection with the UMTS network in chapter "UMTS", Page 26 and chapter "Setting Airplane mode, VPN, Tethering & portable hotspot, WiFi direct and mobile networks", Page 47.

Your device can connect with the Internet via UMTS.

GPS

Your device is equipped with an integrated GPS module. With the aid of suitable software, you can therefore use your device as a navigation system.

26

Fujitsu Technology Solutions

Page 30
Image 30
Fujitsu VFY:M53200MPAD2IN manual Switching the wireless components on and off, Access via Umts, WLAN/Wi-Fi and Bluetooth