Receiving ACK RQ with AUTO ACK Off
After verifying contents of receive message, manually transmit the ACK BQ signal by pressing the [CALL] key within five minutes. If the signal is transmitted more than five minutes after reception of ACK RQ signal, it is treated as an ACK RQ signal rather than
ACK BQ.
*Received * ACK RQ ID:
Other ship ID
Alarm sounds. To silence, press the [ALRAM STOP] key.
Press the [ENT] key.
Communication mode
DUPLEX TP No information
Channel:
Working channel
Press the [ENT] key twice.
Acknowledge call < | > |
ACK END NEXT DEL
Press the [ENT] key.
* Acknowledge call *
Telecom1? DUPLEX TP
Press the [ENT] key.
Channel?
Confirm proposal from other station.
ACK: Transmits ACK BQ signal.
END: Returns to normal display.
NEXT: Recalls received message.
DEL: Deletes received message from memory.
Communication mode
To change communication mode, press the [SELECT] key.
(*1)
(continued on next page)
Working channel
•If no change is necessary, press the [ENT] key.
•To change working channel, press the [SELECT] key then enter desired channel number followed by the [ENT] key.
* Ready for calling *
ACK BQ CALL CH70
To transmit the ACK BQ signal, press the [CALL] key.
Returns to normal display.
Then, communicate with other station.
