Furuno FM-8500 manual Operation after making DSC call

Operation after making DSC call

Voice communication is started. After completion of communica- tion, the display changes as shown in (1) or (2) below depending on how voice communication terminated.

(1)When you end voice communication by pressing the [CAN- CEL] key or hanging the handset on the hanger of the VHF, the display of the FM-8500 changes as follows.

PSTN CALL

Display 1

Working channel

* Call in progress *

END OF CALL

Transmits “End of call” command.

* Waiting for end call ack * AUTO RELAY in 2 sec

Counts down.

•If “End call ack” is not received within two seconds;

•If “End call ack” is received;

* Call in progress *

AUTO RETRY

* Waiting for end call ack * 2 sec to go

•If “End call ack” is receiver;

•If not received;

*End call not received * No charge information

(No charge time information)

*Received * END OF CALL Charge time:

Charge time appears.

5-6